- 100% fired and tested: All units and each component are tested on the manufacturing line.
- Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free.
- 30 second blower delay: At start-up assures a warm duct temperature at furnace start-up. Adjustable blower off settings (60, 90, 120 and 180 seconds).
- 30 second post purge: Increases life of heat exchanger.
- Hot surface igniter: Innovative application of a silicon nitride appliance type igniter. Utilizes proven Smartlitea® technology.
- Color coded wire harness: Designed to fit the components, all with quick-connect fittings for ease of service and replacement.
- Flexible category IV venting system: May be vertically or horizontally vented using either a one-pipe or two-pipe system for maximum flexibility in installation.
- High Static Blowers: All models equipped with high static blowers.
- Low Boy Height: Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install.
- Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life.
- 90 second fixed cooling cycle blower-off delay (TDR): Increases cooling performance when matched with a Nortek coil.
- High efficiency blower kits: Maximize efficiencies. On select units, a SEER improvement of up to 1 point is realized.
- Multi-speed direct drive blower: Designed to give a wide range of cooling capacities. Switches on PCB, provide ultra easy motor speed selection.
- LP convertible: Simple burner orifice and regulator spring change for ease of convertibility.
- Diagnostic lights for easy troubleshooting without counting flashes: Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes.
- Incorporates integrated control board: With connections for electronic air cleaner and humidifier.
- Two piece door design: Enhances furnace appearance and uses captured screws to prevent losing door screws.
- Blower Compartment: Sealed door to reduce air leakage and insulated for ultra quiet operation.
- Sealed vestibule: Reduces burner and indoor sound levels.
Frigidaire 904643F - FG7SC 090D-35C - 92% AFUE, 90K BTU, Single Stage, Upflow/Horizontal Gas Furnace
Item#: FG7SC090D35C
Brand: Frigidaire
Free Shipping Sold by: waterheatingsystem.com
Seller | Seller Ratings | Info | Price | Go to Store |
---|---|---|---|---|
www.air-and-heating.com | Trusted Seller | In Stock New | $249 | Go to Store |
www.airconditionersforhome.com | Trusted Seller | In Stock New | $249 | Go to Store |
www.mitsubishiductlessairconditionercost.com | Trusted Seller | In Stock New | $249 | Go to Store |
www.4tonairconditioners.com | Trusted Seller | In Stock New | $249 | Go to Store |
www.trailerairconditioner.com | Trusted Seller | In Stock New | $249 | Go to Store |
Product Details
Frigidaire FG7S (C and L Series), Induced Draft - 92.1 AFUE, Condensing Upflow/Horizontal Gas Furnaces. The high efficiency Upflow gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet. Upflow/Horizontal units come ready for Upflow or horizontal applications. The extended flush jacket provides a pleasing "appliance appearance." Design certified by CSA for application in Canada and the United States.
Name | Frigidaire 904643F - FG7SC 090D-35C - 92% AFUE, 90K BTU, Single Stage, Upflow/Horizontal Gas Furnace |
---|---|
Brand | Frigidaire |
Item Number | FG7SC090D35C |
Manufacturer Product Number | 904643F |
SKU - PIM Number | 1383140695863 |
ERP Number | 212532 |
UPC | N/A |
Unit of Measure | EACH |
Weight | 135.0 Pound (lb.) |
Length | 28.0 Inches (in) |
Width | 21.0 Inches (in) |
Height | 34.5 Inches (in) |
Hazardous Material | No |
EPA Cert Required | No |
Country of Origin | USA |
Equipment Type | Furnace |
AFUE | 92.1% |
CFM | 1910 |
Heating Capacity | 82.8 |
Air Flow | Upflow / Horizontal |
BTU Input | 90000 |
BTU Output | 82800 |
Voltage | 115 VAC |
Full Load Amps | 13.75 |
Phase | Single |
Cycle/Hertz | 60 |
Minimum Circuit Amps | 15 |
Maximum Fuse Size | 15 |
Blower Motor HP | 1 HP |
Rated Load Amps | 13.75 |
Ignition Type | Electronic |
Motor HP | 1 HP |
Motor Type | PSC |
Speed | 4 |
Stages Heat | 1 |
Certifications | AHRI, Nate, CSA |
Color | Gray |
Fuel Type | Natural Gas |
Gas Connection | 1/2" [12.7 mm] N.P.T. |
Thermal Efficiency | 92.1 % |
Warranty Offered | All Parts - 10 Years, 10 Year Quality Pledge to replace unit if the heat exchanger fails within the first 10 years of operation, to original owner. Registration required within a limited period of time after installation. |
Energy Star Rated | No |
LEED Certified | No |
UL Listed | No |
UL Recognized | No |
ETL Certified | No |
Tonnage | 3 |
GEM - Case Quantity |
Related Product
-
HONDA Inverter Generator 1600W Companion. Brand: Generators
-
MITSUBISHI PCAA30KA4 PUZA30NHA4 CEILINING SUSPENDED SPLIT SYSTEM Brand: Mitsubishi
More Brands
-
CLM1972 (2)KMS0972 Brand: Sanyo
-
Mitsubishi MSZFH18NA2 Wall Mounted 18000 BTU Inverter Brand: Mitsubishi